How to write a transcript for a video, with a sample to copy

A video transcript is everything said in the video, written out in order, with a note of who is speaking and any sound that matters. To write one, play a short stretch, pause and type what was said; start a new paragraph when the speaker or the subject changes; put a time at the start of each paragraph; then read the whole thing against the video once. Or let a tool write the first draft and correct it. Below is what a transcript looks like in its three usual forms, written from the recording playing on this page.

or drop your video or podcast here
MP4 or MOV, or audio for subtitles.

The video never leaves your browser. On a computer, the sound is heard on your own device unless you choose our speech service or the computer is too slow to listen well; on a phone, it goes to our speech service unless you keep it on the phone. The service gets short pieces of sound, never the picture.

  • Free, no sign-up
  • Video never uploaded
  • Text, SRT or VTT
  • A real sample below

Live preview, rendered on this page by the same engine that captions your video. The samples below are this recording.

What a video transcript looks like

One recording, three forms. The recording is the one playing at the top of this page: one man, two sentences, about eight seconds. All three were made by the code that writes Burncaps' files, from that recording's words and their times, and nothing in them has been tidied by hand.

1. Plain text

The words in paragraphs and nothing else. This is the form for reading: show notes, a blog post, a page beside the video for people who would rather read than watch.

If you make short-form videos, adding captions shouldn't take longer than making the video. This is Burncaps.

2. Text with timestamps

The same paragraphs, each starting with its time in the recording as hours, minutes and seconds. This is the form for finding a quote again, for editing and for research. A longer video gives one time for each paragraph.

[00:00:00] If you make short-form videos, adding captions shouldn't take longer than making the video. This is Burncaps.

3. An SRT subtitle file

The words cut into short numbered lines, each with the moment it shows and the moment it hides. This is the form a video player reads to show captions. The SRT format, line by line.

1 00:00:00,560 --> 00:00:05,000 If you make short-form videos, adding captions shouldn't take longer than making 2 00:00:05,000 --> 00:00:06,000 the video. 3 00:00:06,380 --> 00:00:07,480 This is Burncaps.

With the speaker named

A transcript of more than one person names whoever is speaking at the start of each turn. The name here was typed by hand: Burncaps does not tell voices apart and does not add names.

[00:00:00] PRESENTER: If you make short-form videos, adding captions shouldn't take longer than making the video. This is Burncaps.

Which form for which job

The formUse it forIn Burncaps
Plain textReading: show notes, an article, a transcript on the page beside the videoPress Text
Text with timestampsFinding a line again, pulling quotes, planning an editTick Times in the Text file, then press Text
SRT or VTTCaptions a player shows in time with the voice. Which file each place takesPress SRT or VTT

How to write one by hand, step by step

  1. Choose the form first. Plain text for reading, timestamps for finding things, a subtitle file for captions. Decide too whether you keep every um and repeat or leave them out.
  2. Play a short stretch, pause, type. A sentence or two at a time. Slow the playback if your player lets you.
  3. Start a new paragraph when the speaker changes or the subject does. With more than one person, put the speaker's name at the start of each turn.
  4. Note the sounds that matter in square brackets, such as [laughter] or [music], where a reader would miss something without them.
  5. Add the time at the start of each paragraph, read off the player.
  6. Mark what you cannot hear with the time, like [inaudible 00:02:10], rather than guessing a word.
  7. Read it against the video once, start to finish, and check every name and number.

Or start from a draft

Typing is the slow part. A speech-to-text tool writes the draft and leaves you steps 3, 4 and 7. In Burncaps:

  1. Drop the video on the box at the top of this page, or tap it to choose a file on a phone. An MP4 or MOV works, and so does an MP3, M4A or WAV.
  2. Wait while it listens. Every word appears as a script under the video, with the language it heard named above it.
  3. Correct any word. Click it and type. One click changes it everywhere it was heard.
  4. Save the form you chose: Text, Text with Times ticked, SRT or VTT.
  5. Add the names and the sounds in the text file. Burncaps writes the words; it does not name speakers or describe sounds.

Text and subtitle files are free without limit for recordings up to ten minutes, with no sign-up. A longer one, up to three hours and 10 GB, gives its first ten minutes free, and all of it as one of your free videos (2 every 30 days), in the 7-day Pro trial (free, no card) or on a paid plan.

Every um, or a clean read?

Verbatim

Every word as spoken, with the ums, repeats and false starts. For research interviews and anything where how it was said matters as much as what.

Clean verbatim

The same words with the ums, repeats and false starts left out. Nothing is reworded. This is the usual form for a transcript people will read.

What Burncaps gives

The words as the speech model heard them, and speech models do not always write every um. Click a filler and press Cut and the Text file leaves it out; for strict verbatim, listen through and add what is missing.

What it costs

Free: 2 videos every 30 days, each with captions and up to 10 clips, no watermark, no sign-up. Then try Pro free for 7 days, no card. Pro is $29 a month for unlimited clips and captions; Starter is $11.98 a month for 6 videos and up to 50 clips. Text and subtitle files are free without limit for recordings up to ten minutes, with no sign-up.

Questions, answered plainly

How do I write a transcript for a video?

Play a short stretch, pause and type what was said. Start a new paragraph when the speaker or the subject changes, name the speaker at the start of each turn, note sounds that matter in square brackets, put a time at the start of each paragraph, and read the whole thing against the video once. A speech-to-text tool can write the first draft for you to correct.

What does a video transcript look like?

In its plainest form it is the spoken words in paragraphs. With timestamps, each paragraph starts with its time in the video, like [00:01:23]. As a subtitle file such as SRT, the words are cut into short numbered lines, each with a start and an end time. A transcript of more than one person names the speaker at the start of each turn.

What is the difference between a transcript and captions?

A transcript is the whole of what was said as a text you read on its own. Captions are the same words cut into short timed lines that show on the video as it plays. An SRT or VTT file holds captions; a text file holds a transcript.

Should a transcript include ums and repeats?

It depends on the use. A verbatim transcript keeps them; a clean verbatim transcript leaves them out and rewords nothing. Most transcripts written for readers are clean verbatim.

How do I add timestamps to a transcript?

By hand, read the time off the player at the start of each paragraph and type it in square brackets. In Burncaps, tick Times in the Text file and each paragraph of the text file starts with its time; an SRT or VTT file has a time on every line.

Does Burncaps name the speakers?

No. The Text file holds the words in paragraphs and does not name or label who is speaking, so you add the names yourself. Its paragraphs follow pauses, not speakers.

Can I get a transcript of a video for free?

Yes. Drop the video in Burncaps and it writes every word as a script in your browser; press Text, SRT or VTT to save it. Text and subtitle files are free without limit for recordings up to ten minutes, with no sign-up.

How long can the video be?

Up to ten minutes, a recording's text and subtitle files are free, as often as you like. A longer one, up to three hours and 10 GB, gives its first ten minutes free, and all of it as one of your free videos (2 every 30 days), in the 7-day Pro trial (free, no card) or on a paid plan.

Is my video uploaded?

No. Burncaps opens the video in your browser and never receives it. On a computer, the sound is heard on your own device unless you choose our speech service or the computer is too slow to listen well; on a phone it goes to our speech service unless you keep it on the phone (short pieces of sound, never the picture, to Microsoft's speech recognition in the EU, which by Microsoft's terms for the service stores none of it).

Burncaps facts, checked 15 November 2026

What it is: a browser tool that burns animated word-by-word captions into a talking video, or finds the best moments of a talk, podcast or interview and gives them back as ranked, captioned 9:16 clips.

Price: free for 2 videos every 30 days, each one recording with its captioned video and up to 10 clips, no watermark and no sign-up; then the free 7-day Pro trial, no card (your email only); then Pro, $29 a month, gives unlimited clips and captioned videos, or Starter, $11.98 a month, gives 6 videos every 30 days, each fully captioned, and up to 50 clips.

Privacy: the video never leaves your browser. The sound goes only to our speech service, on a phone unless you switch it off, on a computer if you choose it or if it is too slow to listen well. Because the video never reaches us, we cannot keep it or train AI on it, and we train no AI on anything you make.

Files: MP4 or MOV in, MP4 out. Captions on the whole video: up to ten minutes on Free, up to three hours on a paid plan, on a phone or a computer. On iPhones, a whole video over ten minutes has been tested in the iPhone simulator on a Mac (16 minutes at 1080p), not yet on a real iPhone. Clips: up to three hours, on a phone or a computer. SRT, VTT, ASS and text files are free without limit for recordings up to ten minutes; a longer recording, up to three hours, gives its script and those files (the first ten minutes free, all of it with one of your free videos, in the trial or on a paid plan).

Clips: about one clip for every two minutes of talk, up to 30, ranked, the ones we would post first circled, each showing the words it opens and ends on and the reason it was chosen; each cut to 9:16 with ums and dead air removed, an opening card and captions, framed on whoever is talking. Every clip of the whole recording is found and shown, free and with no sign-up; each free video exports up to 10 of them; Starter exports up to 50 clips every 30 days from its 6 videos, and the 7-day trial and Pro export every clip, unlimited.

Languages and styles: captions in the language spoken, twelve Indian languages heard on your device, translation into more than 60 languages, 60 caption styles.

After it listens: correct any word (one click changes it everywhere), add or cut words, one to six words at a time, position, size, text and highlight colours, and names this browser remembers, all free and without listening again.

Made by: Jordan Labs Ltd, UK company no. 17358646.

Against other tools: sixteen caption tools compared, from the vendors' own pages.