Increase video volume: make a quiet video louder, measured

Drop a video and this page measures how loud it sounds, then lifts it to -14 LUFS with a limiter that stops the peaks clipping. The picture is copied as it is, not re-encoded, so it loses nothing. Free, no sign-up, no watermark, and the video is never uploaded.

Drop a video here
or click to choose. MP4, MOV, M4V or M4A. It opens on this device and is never uploaded.

Now
-
After
-

Open a video and its loudness appears here.

What it does to the sound

It measures, then moves the level by the difference. Nothing is guessed: the number on the left is your file, read on your device, and the number on the right is read the same way from the new sound after it is written as AAC, decoded as a player decodes it.

StepWhat happens
MeasureThe integrated loudness of the whole recording, as ITU-R BS.1770 defines it: the sound weighted the way an ear hears it, in 400 ms blocks, with silence and the quietest stretches left out. It is the meter our LUFS checker uses, which read within 0.05 LU of ffmpeg's own meter on 15 test files.
LiftThe whole sound moves by the difference to -14 LUFS: up by at most 18 dB, or down by at most 6 dB if it is louder.
Hold the peaksA look-ahead limiter holds every sample under -1 dBFS before the sound is written as AAC. Writing it can lift a peak a little, so the page reads the loudest sample of the written sound and tells you; on our test files where the limiter worked, it read -0.8 to -0.9 dBFS. If the limiter had a lot to hold back, the sound is lifted once more, by up to 3 dB, and held again.
WriteThe new sound is written as AAC, the encoder set to about the original's bit rate (128 to 256 kbps for stereo). A MOV stays a MOV, an MP4 or M4V comes back as an MP4, and an M4A as an M4A.
PictureCopied byte for byte, never decoded, so it is identical to the original. Rotation, colour and HDR details are carried over.

A real one, measured

A 9-minute, 412 MB recorded talk at -25.2 LUFS came back at -14.1 LUFS, read by ffmpeg’s own meter as well as this page’s, in 8.4 seconds in Chrome on a Mac. All 16,184 picture packets were identical to the original’s, the sound lined up with the old sound to the millisecond, and written as AAC its loudest sample read -0.8 dBFS. A 2-minute 30-second talk lowered to -30.2 LUFS came back at -14.2 LUFS in 2.2 seconds.

What it cannot do

Take out noise

It levels the whole sound, so hiss, hum and room echo come up with the voice. It does not separate them.

Lift past 18 dB

A recording quieter than about -32 LUFS cannot reach -14 here. The page tells you what it will reach before you press the button.

Measure true peak or range

The page reads the loudest sample of the written sound. True peak, between the samples, and loudness range are not measured.

How to make a video louder

  1. Drop the video on the box at the top of this page, or click it to choose one.
  2. Read the loudness it measured, and what it will lift it to.
  3. Press Make it louder. The louder copy is saved beside the original, which is left as it was.

Questions, answered plainly

How do I increase the volume of a video without uploading it?

Drop the video on this page, or click to choose it. The page measures its loudness on your device, then Make it louder lifts the sound to -14 LUFS and saves a new file beside the original. The video is never sent anywhere.

How loud does it make my video?

-14 LUFS, measured the way ITU-R BS.1770 describes. It is the level Spotify publishes for its default setting and the level Burncaps writes its clips at. YouTube's Help gives no LUFS number, so we do not say YouTube uses it.

Will making it louder distort the sound?

Not by clipping. After the lift, a look-ahead limiter turns the sound down a few milliseconds before each peak that would pass -1 dBFS and lets it back up over about a tenth of a second, so no sample is cut off into a buzz. Any hiss or room noise in the recording is lifted with the voice: this page levels the sound, it does not clean it.

Does it lower the picture quality?

No. The picture is never decoded: the new file points at the same picture bytes as the original, so every frame is identical. Only the sound is written again, as AAC, the encoder set to about the original's bit rate.

My video is very quiet. Why does it not reach -14 LUFS?

This page lifts the sound by at most 18 dB, eight times the level, the same cap as Burncaps clips, because lifting a very quiet recording further mostly lifts its hiss. A recording at -36 LUFS comes back at about -18 LUFS. The page says what it will reach before you press the button.

Is this an audio normalizer?

Yes, a loudness normalizer: it sets how loud the whole recording sounds, which is what LUFS measures, rather than only how high its loudest peak goes. A video louder than -14 LUFS is brought down towards it by at most 6 dB, so one louder than about -8 LUFS stops short of it, and the page says where it will land before you press the button. The meter is the one our LUFS checker uses.

Can it make an audio file louder?

An M4A, yes: drop it and it comes back as a louder M4A. MP3 and WAV files are not opened here; this page reads MP4, MOV, M4V and M4A.

Which files can I open?

MP4, MOV, M4V and M4A files whose sound is AAC, MP3, AC-3 or E-AC-3, recorded at 44.1 or 48 kHz, which is what phones and cameras record. PCM sound, which some cameras put in a MOV, is not read yet, and WebM and MKV are not supported here yet. Surround sound comes back as stereo.

Is there a size limit?

We set no limit of our own. The picture is never read into memory, and the sound is never held decoded: the page holds the file's own compressed sound, read once, and the new sound as it is made, AAC at up to 256 kbps, which is about 1.9 MB for each minute. The longest we have tested is a 9-minute, 412 MB MP4 in Chrome on a Mac.

Does it use one of my free videos?

No. This page is free on its own and never counts against the free videos in the Burncaps editor.

Does it work on a phone?

We have tested it in Chrome on a Mac and have not yet proven it on a real phone, so we do not promise it there. If it fails on a phone, the video has not gone anywhere: it stays on your phone.

Is my video uploaded?

No. The file is opened, measured and rewritten by this page on your device, and neither the file nor the result is sent anywhere, which you can check in your browser's network tab on a computer. The page does send these, and never the video or anything from it: anonymous step counts, such as that a file was saved; requests to our own server for the price that applies and for the day's analytics code; Cloudflare's cookieless page-view counter; and, to PostHog, our analytics service, the main steps, repeated clicks on one spot and, outside the European Economic Area, for some pages, a recording of how the page changed, under a code that changes every day, or a coded account ID if you are signed in (see the privacy policy).

Burncaps facts, checked 10 November 2026

What it is: a browser tool that burns animated word-by-word captions into a talking video, or finds the best moments of a talk, podcast or interview and gives them back as ranked, captioned 9:16 clips.

Price: free for 2 videos every 30 days, each one recording with its captioned video and up to 10 clips, no watermark and no sign-up; then the free 7-day Pro trial, no card (your email only); then Pro, $29 a month, gives unlimited clips and captioned videos, or Starter, $11.98 a month, gives 6 videos every 30 days, each fully captioned, and up to 50 clips.

Privacy: the video never leaves your browser. The sound goes only to our speech service, on a phone unless you switch it off, on a computer if you choose it or if it is too slow to listen well. Because the video never reaches us, we cannot keep it or train AI on it, and we train no AI on anything you make.

Files: MP4 or MOV in, MP4 out. Captions on the whole video: up to ten minutes on Free, up to three hours on a paid plan, on a phone or a computer. On iPhones, a whole video over ten minutes has been tested in the iPhone simulator on a Mac (16 minutes at 1080p), not yet on a real iPhone. Clips: up to three hours, on a phone or a computer. SRT, VTT, ASS and text files are free without limit for recordings up to ten minutes; a longer recording, up to three hours, gives its script and those files (the first ten minutes free, all of it as one of your free videos, in the trial or with Pro or Starter) and its clips (every one found and shown before you sign up; up to 10 from each free video exported free, up to 50 every 30 days from Starter's 6 videos, every one in the trial or with Pro).

Clips: about one clip for every two minutes of talk, up to 30, ranked, the ones we would post first circled, each showing the words it opens and ends on and the reason it was chosen; each cut to 9:16 with ums and dead air removed, an opening card and captions, framed on whoever is talking. Every clip of the whole recording is found and shown, free and with no sign-up; each free video exports up to 10 of them; Starter exports up to 50 clips every 30 days from its 6 videos, and the 7-day trial and Pro export every clip, unlimited.

Languages and styles: captions in the language spoken, twelve Indian languages heard on your device, translation into more than 60 languages, 60 caption styles.

After it listens: correct any word (one click changes it everywhere), add or cut words, one to six words at a time, position, size, text and highlight colours, and names this browser remembers, all free and without listening again.

Made by: Jordan Labs Ltd, UK company no. 17358646.

Against other tools: sixteen caption tools compared, from the vendors' own pages.